Tutorial on BMTF LED Display

Tutorial 04: BMTF LED Display for uploading video on 17 Mar 2020

Step-1:

Program Run & File open:

1.At first run the HDplayer software.

2. Go to File->Open(Click and  select happy birthday file).

3. Connect Device

Step-2:

Hardware Settings:

1.Go to Settings Menu->Hardware Settings (Click )->Enter password 888 in passwrod box.

2.Then Go to Smart Settings ->Basic Settings _->Module Information ->Width-> Change it  32-> Then Click Next untill it come Determine Scan Mode  .

3. In Determine Scan Mode  Change Scan  Mode  2  and Click Next Then Trace Box  Open.

4. In Trace Box in Tracking Point select column 1 row 9 hold right arrow key up to 32. Again Select column 1 row 1 hold right arrow key 33-64.Then in column 1 row 10 hold down arrow key up to 10-16->Trace Complete ->Exit.

Step-3:

File Send/Display:

1.Click Send Button on the Second Menu Bar Then Select Connected Device ID Then Again Click Send Button.

You Can Also Download This Tutorial PDF format to See in Bangla.

Download Happy Birth Day Display Player.Download

 

Tutorial 03: Video Upload on 17 Mar 2020

Step-01: First you have to download LED player and install (if not installed previously). Close the program after installation.

Step-02:

  1. Download and extract the Video Player version 4.1. Download
  2. If you click ‘Screen16.boo’ icon from extracted files , project will open automatically.
  3. Click ‘Video Program’ under Screen16 on the left pane.
  4. Click Video menu as shown in the picture

Step – 03:

  1. Upload your video by clicking + button (see picture).
  2. Enlarge your video to full screen as shown in the picture.
  3. Click send button to upload this screen to the LED panel. You can upload max 4 GB.

Tutorial 02: Bigger ‘Hour’ in Countdown Clock on 16 Mar 2020

Sample Screen on 16 March 2020

Step-01: Follow serial 1 and 2 if you have not installed those in your laptop.

  1. First you have to download LED player and install. Close the program after installation.
  2. You have to install Bangla font (Siyam Ansi and Kalpurush Ansi). Download the font (Right click over Download and click ‘save link as’).

Step-02:

  1. Download and extract the LED Display Player version 3.1. Download
  2. If you click ‘Screen1.boo’ icon from extracted files , project will open automatically. Click Hour Display.
  1. Now connect the RJ45 cable of the LED Box to your laptop.
  2. After few seconds, your LED devices will be connected. Device name will be displayed.
  3. Click ‘Send’ on the top-right corner.

Tutorial 01: Basic Installation of Countdown Clock

  1. First you have to download LED player and install. Close the program after installation.
  2. You have to install Bangla font (Siyam Ansi and Kalpurush Ansi). Download the font (Right click over Download and click ‘save link as’).
  3. Download and extract the LED Display Player version 2.1. Download
  4. If you click ‘Screen1.boo’ icon from extracted files , project will open automatically (you will see the screen of step 8).
  5. Now connect the RJ45 cable of the LED Box to your laptop.
  6. After few seconds, your LED devices will be connected. Device name will be displayed.

7. Now, click Program3 under screen1. You will see the Countdown Clock.

8. Now, click ‘Send’ at the right corner. It is done.

9. If you find different time on LED Clock than your PC screen, then you have to synchronize the time. For that, click Control>Time Correction>Synchronize. Then from right pane, synchronize.

Please contact with following number if any problem for software update on 16,17 March

01711028971,01945591258,01781884746